Tree Leaves Calculator

How many leaves are on a tree?
in
Leaves needed to cover the plate in one layer, with no gaps or overlaps.
ft
Distance across the crown's outline on the ground, edge to edge through the trunk. Average a few directions for an uneven crown.
How many bags do you need? (optional)
Use an average-sized tree if your trees differ.
in
Squeeze a handful of leaves into a ball, let go and measure it.
US gal
dr
Weigh a bunch of leaves and divide by how many there are. 1 dram (dr) = 1.772 g = 1/16 oz.
How many leaves are in a pile? (optional)
in
A handful of leaves from the pile, gathered into a ball without squashing.
ft
ft
Biology Updated 5 Nov 2026

Estimates how many leaves are on a tree with a paper plate and a tape measure. Cover a round plate with one layer of the tree's leaves and count them, measure how wide the crown's shadow is on the ground, then pick the species: its leaf area index (LAI) says how many layers of leaves sit above each patch of ground. The result is an order-of-magnitude estimate, not a count. Optional sections turn the figure into the number of lawn bags and the weight of leaves to rake from your yard, and estimate how many leaves are in a cone-shaped pile.

  • This is a rough estimate of the order of magnitude, not a leaf count.
  • The crown's ground projection is treated as a circle, and leaves on the plate as one gap-free, non-overlapping layer.
  • Species LAI values are averages for full summer foliage; trees in autumn, drought or after pruning carry fewer leaves.
  • Leaf piles are modelled as cones and full bags hold leaves at the same density as a squashed hand-made ball.

Formula

Leaves on a tree = LAI × leaves on plate × crown area ÷ plate area, where each area = π × (diameter ÷ 2)². Bags = trees × leaves ÷ (leaves in squashed ball ÷ ball volume) ÷ bag volume, with ball volume = 4/3 × π × (diameter ÷ 2)³. Leaves in a pile = (leaves in loose ball ÷ ball volume) × 1/3 × π × (pile diameter ÷ 2)² × pile height.
  • The plate count gives how many leaves cover a unit of ground in a single layer. Multiplying by the crown's ground area gives the leaves needed to shade that ground once.
  • Leaf area index (LAI) is the one-sided leaf area above each square metre of ground, so it is the average number of leaf layers in the crown. For flat broadleaves the area of a leaf lying on a plate is its one-sided (projected) area, the same basis the LAI values use.
  • Species LAI presets are typical values: 4.7 for a typical deciduous tree, from 2.73 (quaking aspen) to 6.64 (sugar maple). They sit close to the global mean of about 4.5 found in a review of over 1,000 field measurements (Asner and others, 2003), but the single-species figures are not taken from a published table. Real trees vary a lot with site, age and season, so treat the answer as an order of magnitude.
  • Because only the ratio of areas matters, the plate and crown units cancel: in the worked example 9 × (360 in ÷ 10 in)² × 4.7 = 54,821 leaves.
  • Bags and piles use a leaf 'packing density': leaves in a hand-made ball ÷ the ball's volume. A squashed ball imitates leaves pressed into a bag; a loose ball imitates a pile, which is treated as a cone.
  • Bag weight = bag volume × packing density × mass of one leaf; total mass = trees × leaves × mass of one leaf.

Sycamore maple in a yard

Inputs
  • Units: imperial
  • Leaves on one tree: estimate
  • Plate diameter: 10
  • Number of leaves on the plate: 9
  • Tree crown projection diameter: 30
  • Tree species: typical
  • Leaf area index (LAI): 4.7
  • Number of leaves on a tree: 100000
  • Number of trees: 1
  • Squashed ball diameter: 6
  • Number of leaves in the squashed ball: 40
  • Bag volume: 39
  • Average mass of one leaf: 0.5
  • Loose ball diameter: 8
  • Number of leaves in the ball: 30
  • Pile diameter: 6
  • Pile height: 4

Nine leaves cover a 10 in plate and the crown's shadow is 30 ft (360 in) across, so one layer over the crown area takes 9 × (360 ÷ 10)² = 11,664 leaves. With the typical deciduous LAI of 4.7 the tree carries about 4.7 × 11,664 = 54,821 leaves, or about 50 thousand. A squashed 6 in ball holds 40 leaves, so a 39-gallon bag holds about 3,186 leaves and the tree fills 17.21 bags (have 18 ready). At 0.5 dr per leaf that is 107.07 lb of leaves, about 6.22 lb per bag. A loose 8 in ball of 30 leaves means a 6 ft wide, 4 ft high cone-shaped pile holds 7,290 leaves.

Sources & references

Frequently asked questions

How many leaves does a typical tree have?
A yard tree with a crown about 30 ft (9 m) across usually works out at tens of thousands of leaves: the worked example gives about 55,000 for a maple, and a large oak with a 50–60 ft crown works out at roughly 180,000–260,000 with the same plate count. Small-leaved trees have far more leaves than large-leaved ones for the same crown, which is why the plate count matters.
What is the leaf area index (LAI)?
LAI is the total one-sided area of leaves divided by the ground area under them. An LAI of 5 means that, on average, five layers of leaves lie above every patch of ground beneath the crown. A global review of over 1,000 field measurements found a mean of about 4.5, with biome averages from 1.3 for deserts to 8.7 for tree plantations and 5.1–6.7 for temperate evergreen forests; sparse or young trees are lower.
How accurate is the paper plate method?
It gives the right order of magnitude, not an exact count. The biggest errors come from the LAI (a single tree in the open can differ from the forest average used for the preset) and from an uneven crown. Use a mix of small and large leaves on the plate and average several crown measurements to reduce the error.
How many bags do I need for my leaves?
Divide the number of leaves by how many fit in one bag. Squash a handful of leaves into a ball, count them and measure the ball: that gives the packing density, and a bag holds bag volume × density leaves. With 40 leaves in a 6 in ball, a 39-gallon bag holds about 3,200 leaves, so a 55,000-leaf tree fills about 17–18 bags.
Why is loblolly pine in the species list?
It is a common US tree. Pine 'leaves' are needles in bundles, so the plate count and LAI are much rougher for it than for broadleaf trees, and pines do not drop all their needles each autumn.

Related calculators