Mowing Cost Calculator

Contractor's price
USD per area unit
Season
cuts
Number of cuts in a year or season, e.g. weekly from April to October.
Biology Updated 5 Nov 2026

Prices a lawn or field mowing job in two ways. In cost mode, multiply a contractor's rate per square foot, square yard, acre or hectare by the lawn area, or an hourly rate by the hours worked, to get the bill for one cut. In mower mode, enter the mower's forward speed, cutting width and field efficiency to see how many square feet or acres it covers per hour and how long your lawn takes. Add the number of cuts in a season to total the yearly bill and hours.

  • Each mowing costs the same; seasonal discounts, minimum call-out charges, trimming, edging and leaf removal are not included unless they are part of the rate you enter.
  • Mowing time assumes a constant forward speed and a full-width cut on every pass, reduced only by the productivity percentage.
  • All money values are in US dollars and are taken from your inputs, not from a price survey.

Formula

Per area: cost = price per area unit × lawn area (in the same unit). Per hour: cost = hourly rate × hours. Mowing capacity = speed × cutting width × productivity; in US units, acres per hour = mph × width (ft) × efficiency ÷ 8.25. Mowing time = area ÷ capacity. Season cost = cost per mowing × number of mowings.
  • The lawn area is converted to the unit the price is quoted in before multiplying, so a price per square yard and an area in square feet give the same bill as matching units.
  • 8.25 comes from units: 1 mph × 1 ft = 5,280 ft² per hour, and 43,560 ft² (1 acre) ÷ 5,280 = 8.25. In metric, hectares per hour = km/h × width (m) × efficiency ÷ 10.
  • Productivity (field efficiency) accounts for turns, overlapping passes, obstacles and emptying the grass catcher. Penn State Extension notes some field operations run near 50% and others above 80%; small, irregular lawns sit at the low end.
  • Mowing time is rounded to the nearest minute for the hours-and-minutes figure; the decimal hours are used for any cost based on time.
  • Prices are your own inputs. Contractor rates vary with region, grass height, slope, trimming and clipping removal, so no default rate is a market claim.

How long does half a hectare take with a 50 cm mower?

Inputs
  • I want to find the…: time
  • The company charges…: area
  • Mowing price: 2 USD per area unit
  • Price is per: yd2
  • Area to mow: 55
  • Area unit: yd2
  • Mowing price: 50 USD per hour
  • Hours of work: 1.5 h
  • Mower speed: 6
  • Speed unit: kmh
  • Mower (cutting) width: 50
  • Width unit: cm
  • Expected mowing productivity (field efficiency): 80 %
  • If you have… to mow: 0.5
  • Area unit: ha
  • Cost per hour of mowing (optional): 40 USD per hour
  • Mowings per season (optional): 20 cuts

A mower moving at 6 km/h (6,000 m/h) with a 0.5 m deck at 80% productivity covers 6,000 × 0.5 × 0.8 = 2,400 m² per hour, which is 0.24 ha/h. Half a hectare (5,000 m²) therefore takes 5,000 ÷ 2,400 = 2.08 h, or 2 h 5 min. At $40 per hour that cut costs 2.0833 × $40 = $83.33, and 20 cuts in a season cost $1,666.67 and take 41 h 40 min.

Sources & references

  • Managing Machinery and Equipment
    Penn State Extension · Retrieved 5 Nov 2026

    Field capacity (acres/hour) = speed (mph) × width (ft) × field efficiency ÷ 8.25, and typical field efficiencies of about 50% to above 80%.

Frequently asked questions

How do I estimate the cost of mowing my lawn?
Measure the lawn area and multiply it by the contractor's price per unit area, converting units first if needed. For example, 55 square yards at $2 per square yard costs 55 × 2 = $110 per mowing. If the company charges by the hour, multiply the hourly rate by the hours the job takes.
How many acres per hour can my mower cut?
Multiply the mowing speed in mph by the cutting width in feet and the field efficiency, then divide by 8.25. A 21-inch (1.75 ft) push mower at 3 mph and 80% efficiency cuts about 3 × 1.75 × 0.8 ÷ 8.25 = 0.51 acres per hour, so an acre takes roughly 2 hours.
What productivity percentage should I use?
Use around 80% for open, rectangular lawns and lower values for small lawns with many trees, beds or tight turns. Time a typical cut and compare it with the calculator to find the efficiency that matches your own lawn.
How do I work out the yearly mowing bill?
Enter the number of mowings you expect in the season. The calculator multiplies the cost of one cut by that number; weekly mowing from April through October is roughly 30 cuts, while every-other-week service is about half that.

Related calculators