Cell Doubling Time Calculator

Measurements
Measure the same parameter at the start and end of the experiment.
cells/mL
Time and growth
Also used to report a calculated time.
Biology Updated 29 Oct 2026

Work out how long a cell culture takes to double from two measurements of the same growth parameter, such as cell number, cells/mL, confluency or optical density, taken a known time apart. The calculator also gives the exponential growth rate, number of doublings and fold change, and can run the model the other way to predict the final value, the starting value or the time needed from a known doubling time or growth rate.

  • Cells grow exponentially at a constant rate over the whole interval (no lag, plateau or cell death).
  • The initial and final values are measured the same way and are proportional to the number of cells.
  • Months are 30.4375 days and years 365.25 days when converting units.

Formula

Doubling time = t × ln 2 ÷ ln(final ÷ initial). Growth rate k = ln(final ÷ initial) ÷ t = ln 2 ÷ Td. Final = initial × e^(k·t); initial = final × e^(−k·t); t = ln(final ÷ initial) ÷ k
  • This is the exponential (continuous) growth model: the growth rate k is the natural-log rate, so a culture with k = 0.0136 per hour grows by e^0.0136 − 1 ≈ 1.37% each hour.
  • Any parameter proportional to the number of cells works (cell count, cells/mL, confluency, OD) because only the ratio final ÷ initial enters the formula.
  • Number of doublings n = log₂(final ÷ initial) = t ÷ Td. Fold change = final ÷ initial = 2^n.
  • When the doubling time, growth rate and duration use different units, every value is converted through seconds (1 month = 30.4375 days, 1 year = 365.25 days).
  • The doubling-time mode requires the final value to be larger than the initial value; a shrinking culture has no doubling time.

Pancreatic cancer cells counted three days apart

Inputs
  • Calculate: doubling
  • Growth is given as: doubling
  • Reference parameter: conc
  • Initial value: 10400
  • Final value: 27600
  • Time duration, t: 72
  • Time unit: h
  • Doubling time, Td: 24
  • Doubling time unit: h
  • Growth rate, k: 0.02888
  • Growth rate per: h

The concentration rose from 10,400 to 27,600 cells/mL in 72 hours. ln(27,600 ÷ 10,400) = ln 2.6538 ≈ 0.976, so Td = 72 × 0.6931 ÷ 0.976 ≈ 51.13 hours (about 51 h 8 min) and the growth rate is 0.976 ÷ 72 ≈ 0.01356 per hour. The culture went through log₂ 2.6538 ≈ 1.41 doublings.

Sources & references

Frequently asked questions

Which parameter should I measure?
Anything that scales with the number of cells: a hemocytometer or automated count (cells/mL), the total number of cells in a flask, confluency for adherent cells, or optical density for bacteria and yeast within the instrument's linear range. Use the same method and the same volume basis at both time points.
Why does my doubling time differ from the published value for my cell line?
Doubling time depends on the medium, serum, temperature, CO₂, seeding density and passage number. Measurements that include the lag phase after seeding, or a culture that is approaching confluence, give a longer apparent doubling time. Measure within the exponential (log) phase for the most meaningful value.
Is doubling time the same as generation time or population doubling time?
For an asynchronous culture where every cell divides, they are the same number. Some cell-culture protocols also count cumulative population doublings, PD = log₂(final ÷ initial) per passage; that is the 'Number of doublings' result here.
How is this growth rate different from the one in the bacteria growth calculator?
Here k is the continuous rate in N = N₀·e^(kt). The bacteria growth calculator also offers the discrete rate r in N = N₀(1 + r)^t. They are linked by k = ln(1 + r), and both lead to the same doubling time.
Can I use confluency above 100%?
No. Confluency is the percentage of the surface covered, so the calculator rejects values over 100% and warns when a prediction would pass it. Growth also slows well before 100% because of contact inhibition, so short intervals at low to medium confluency give better estimates.

Related calculators

Bacteria Growth Calculator Models exponential bacterial growth with N(t) = N(0) × (1 + r)^t. Solve for the final number of bacteria, the starting number, the elapsed time, or the growth rate and doubling (generation) time from two counts. Give growth either as a per-period growth rate or as a doubling time, choose seconds through years for every time value, and see the number of generations, the fold change, the specific growth rate and a population-over-time table. Cell Dilution Calculator Plan a cell suspension dilution with C1 × V1 = C2 × V2. Enter any three of the stock concentration, the volume of stock to take, the target concentration and the final volume, each with its own unit (µL, mL, cL or L), and the calculator finds the fourth. It also reports the dilution factor, how much medium or buffer to add, the total number of cells, and a serial dilution plan when the stock volume is too small to pipette accurately. Population Growth Calculator Projects the size of a biological population — bacteria, plants, animals or people — from its starting size, growth rate and elapsed time, or works backwards to the starting size, the growth rate or the time needed to reach a target. Choose a percentage rate per period, a continuous rate, a doubling time, or logistic growth limited by a carrying capacity, set separate units for the rate period and the time, and see the change, equivalent rates, doubling or halving time and a time-series table. Log Reduction Calculator Measure how well a disinfectant, sanitizer, heat step or filter kills microbes. Enter the colony forming units (CFU) before and after treatment, each with its own power-of-ten multiplier, to get the log reduction and percent reduction. You can also convert between log and percent reduction, or work out the surviving CFU (or the starting load) needed for a target 3-log, 5-log or 6-log kill.