Dog Harness Size Calculator

Sizes differ between brands – always confirm with the chart of the harness you buy.
Your dog's measurements
cm
Around the widest part of the rib cage, just behind the front legs, with the dog standing.
kg
Leave blank to size by girth alone. No dog scale? Weigh yourself holding the dog and subtract your own weight.
cm
Around the base of the neck where a collar sits. Many harnesses list a neck range as well as a chest range.
Biology Updated 14 Nov 2026

Measure around the deepest part of your dog's rib cage, just behind the front legs, weigh them, and this calculator places them in a harness size from XX-Small to X-Large, with the matching leash width and typical breeds of that size. Weight or chest girth alone gives the range of sizes that measurement fits; both together narrow it to one size and flag numbers that do not fit together. You can also check the chest girth against Ruffwear's published harness chart, and add the neck girth that many brands list for the neck loop. Centimeters, inches, kilograms and pounds all work.

  • The general chart is a generic, brand-neutral guide; manufacturers' size names and ranges vary, so the chart of the harness you buy takes precedence.
  • Measurements are taken with the dog standing, the tape snug but not tight, around the widest part of the chest.
  • Breeds listed are typical examples only – individual dogs vary in build, coat and age.
  • Chest girths outside 8–48 in (20.3–121.9 cm) and weights above 343 lb (155.6 kg) are treated as measuring errors.
  • This is a sizing aid, not veterinary advice. Ask your vet if your dog has a neck, back or breathing problem that affects which harness it should wear.

Formula

General chart (lb, in): XX-Small up to 5 lb, 8–10 in chest; X-Small 5–10 lb, 9–15 in; Small 10–25 lb, 13–23 in; Medium 25–55 lb, 18–29 in; Large 55–75 lb, 22–39 in; X-Large over 75 lb, 28–48 in. The weight picks the size and the chest girth must fall inside that size's girth band. Ruffwear chart (girth only): XXXS 9–13 in, XXS 13–17, XS 17–22, S 22–27, M 27–32, L 32–36, XL 36–42 in.
  • The girth bands of the general chart overlap, so a chest girth on its own usually fits two or three sizes; adding the weight picks one. A weight exactly on a band edge (5, 10, 25, 55 or 75 lb) goes to the smaller size unless the chest is too big for it.
  • If the girth is outside the band for the dog's weight, the calculator does not guess: it shows the girth range expected for that weight and the weight range expected for that girth so you can re-measure.
  • Centimeters and kilograms are converted with 1 in = 2.54 cm and 1 lb = 0.45359237 kg before the chart is applied.
  • The Ruffwear chart is applied in the unit you measured in, using the brand's own inch or centimeter columns. A girth exactly on the border of two sizes gets the larger size, as Ruffwear advises for puppies between sizes.
  • Neck girth is not used to pick the size; it is shown so you can check that the neck range listed for the harness you buy covers your dog.

A 20 kg dog with a 64 cm chest

Inputs
  • Size chart: general
  • Length unit: cm
  • Weight unit: kg
  • Chest girth: 64 cm
  • Weight: 20 kg
  • Neck girth (optional): 38 cm

20 kg ÷ 0.45359237 = 44.1 lb, which is in the Medium weight band (over 25 up to 55 lb). The 64 cm chest is 64 ÷ 2.54 = 25.2 in, inside Medium's 18–29 in girth band, so the dog is a Medium and a 3/4" (1.91 cm) leash suits it. On Ruffwear's chart the same 64 cm chest falls in S (56–69 cm). The 38 cm (15.0 in) neck is what the harness's neck loop has to fit around.

Sources & references

  • The Size is Right: How to Measure for Your Dog's Gear (Harness, Apparel & Pack Size Chart)
    Ruffwear · Retrieved 14 Nov 2026

    Measure girth at 'the widest part of your dog's chest just behind the front legs'. Chart: XXXS 9–13 in (23–33 cm), XXS 13–17 in (33–43 cm), XS 17–22 in (43–56 cm), S 22–27 in (56–69 cm), M 27–32 in (69–81 cm), L 32–36 in (81–91 cm), XL 36–42 in (91–107 cm); XXXS only for the Hi & Light harness. Puppy at 17 in (43 cm) between XXS and XS: 'We recommend sizing up to the XS'.

  • How to Measure Your Dog for Clothes and Gear
    American Kennel Club · Retrieved 14 Nov 2026

    Chest girth is 'the measurement around the largest part of your dog's rib cage, usually just behind the front legs'; neck girth is measured 'around the base of your dog's neck where the collar sits'. Harnesses 'usually rely on both neck girth and chest girth'; measure standing, use the two-finger rule, and size up when between sizes; sizing varies by brand.

Frequently asked questions

How do I measure my dog for a harness?
Have your dog stand square. Wrap a soft tailor's tape (or a string you then lay against a ruler) around the widest part of the rib cage, just behind the front legs – that is the chest girth. Measure the neck around its base where a collar sits. Keep the tape snug but not tight; you should be able to slide two fingers under it.
Is chest girth or weight more important for harness size?
Chest girth. A harness wraps around the chest, and two dogs of the same weight can differ a lot in build – a 25 lb Pug and a 25 lb Whippet need very different harnesses. Weight is a useful cross-check and a starting point when you cannot measure, which is why this calculator uses both.
My dog is between two sizes. Which one should I buy?
Most brands advise the larger size and tightening the straps, because a harness that is too small rubs and restricts the shoulders. Ruffwear's own example is a puppy with a 17 in (43 cm) chest, on the border of XXS and XS: they recommend XS so the puppy has room to grow.
Why does my dog's size differ between brands?
There is no industry-wide sizing standard. A 64 cm (25.2 in) chest is a Medium on the general chart here but an S on Ruffwear's chart, and other brands draw their lines elsewhere again. Use the size here to shortlist, then compare your dog's girth and neck with the chart of the exact harness model.
How should a harness fit once it is on?
You should be able to slip two fingers flat under every strap. The harness should not ride up into the armpits or press on the throat, and the dog should be able to move its shoulders freely. Re-check puppies every couple of weeks, since they can outgrow a size quickly.

Related calculators

Dog BMI Calculator (Canine Body Mass Index by Breed) Works out a simple canine body mass index from your dog's shoulder height and weight, then compares it with the healthy range for its breed. The index is weight in pounds divided by height at the withers in inches, with breed ranges for 160 breeds derived from American Kennel Club height and weight standards. Mixed-breed dogs are checked against the general guide of 3 or less. You also see the weight band that would put a dog of this height inside its breed range, as a starting point for a conversation with your vet. Dog Food Calculator Works out how much food to put in your dog's bowl each day. Pick the dog's life stage or activity (puppy, neutered or intact adult, weight loss or gain, light to heavy work, senior) and enter its weight; the calculator finds the resting energy requirement, RER = 70 × weight^0.75, and multiplies it by the matching factor to get the daily calories. Then type the calorie content printed on the food bag, per cup, per kilogram, per 100 g, per pound or per serving, and it converts the calories into cups, grams or ounces per day and per meal. Dog Calorie Calculator Estimates how many kilocalories an adult dog needs per day from its body weight and how active it is, using metabolic body weight (kg^0.75) and the activity coefficients from the European pet food guidelines: 95 for low activity or seniors, 110 for 1–3 hours of easy exercise, 125 for vigorous exercise and 175 for working dogs such as sheepdogs. It then turns the calories into grams or ounces of food per day and the amount for a set number of days. If the bag does not state the energy content, enter the guaranteed analysis (dry matter, protein, fat, fibre and ash) and the NRC 2006 equations estimate it.