Fence Calculator

m
m
m
m
Width of each picket
Construction Updated 16 Jun 2026

Fence Calculator is a construction estimator that helps you calculate fence values from your input data. The formula used is: Sections = ceil(Perimeter / Post Spacing); Posts = Sections + 1; Rails = Sections × Rails per section; Pickets = ceil(Perimeter / Picket Width). Accepts imperial (feet, inches) or metric (metres, cm) units as labelled on each input.

Formula

Sections = ceil(Perimeter / Post Spacing); Posts = Sections + 1; Rails = Sections × Rails per section; Pickets = ceil(Perimeter / Picket Width)

Example Calculation

Inputs
  • Total Fence Length: 50 m
  • Post Spacing: 2.4 m
  • Rails per Section: 3
  • Fence Height: 1.8 m
  • Picket Width: 0.1 m

Suppose you enter: Total Fence Length = 50, Post Spacing = 2.4, Rails per Section = 3, Fence Height = 1.8, Picket Width = 0.1. The calculator applies the formula (Sections = ceil(Perimeter / Post Spacing); Posts = Sections + 1; Rails = Sections × Rails per section; Pickets = ceil(Perimeter / Picket Width)) and shows all output values below. Change any input field to immediately see how the result changes.

Frequently asked questions

What is the Fence?
The Fence Calculator is a construction estimator that helps you calculate fence values from your input data. Accepts imperial (feet, inches) or metric (metres, cm) units as labelled on each input.
When should I use this calculator?
Use this calculator whenever you need a quick, accurate result for fence values from your input data without working through the arithmetic manually.
What units should I enter?
Accepts imperial (feet, inches) or metric (metres, cm) units as labelled on each input.
How accurate are the results?
Provides material and dimension estimates. Actual quantities depend on site conditions, waste, and cutting losses.
How do I interpret the result?
Always add a 10–15 % buffer to material estimates to account for waste, cutting errors, and variations in workmanship.
How can I verify the calculation manually?
Use the displayed formula and work through the numbers step by step. If your manual result differs slightly, check rounding and unit conversions first.
Can I use this for planning and budgeting?
Yes. Run best-case, expected, and worst-case inputs to compare outcomes and make safer planning decisions.

Related calculators

Deck Calculator Deck Calculator is a construction estimator that helps you calculate deck values from your input data. The formula used is: Boards across = ceil(Width / (Board Width + Gap)); Total length = Boards across × Deck Length; Boards = ceil(Total length / Board Length). Accepts imperial (feet, inches) or metric (metres, cm) units as labelled on each input. Paint Calculator Paint Calculator is a construction estimator that helps you calculate material quantities needed for a construction or renovation task. The formula used is: Wall Area = 2 × (Length + Width) × Height − Doors × 1.8 − Windows × 1.2; Litres = Area × Coats / 10. Accepts imperial (feet, inches) or metric (metres, cm) units as labelled on each input.