Cardiac Output Calculator
Works out cardiac output, the litres of blood the heart pumps each minute, and the cardiac index, which scales it to body size. The default Fick method uses oxygen consumption and the oxygen content of arterial and mixed venous blood, built from hemoglobin, oxygen saturation and oxygen tension, with oxygen use assumed at 125 mL/min per m² of body surface area unless you enter a measured value. You can also multiply heart rate by stroke volume (entered directly or as end-diastolic minus end-systolic volume) or use echo Doppler LVOT diameter and VTI. Results are compared with the usual resting ranges of 4–8 L/min and 2.5–4 L/min/m².
- Educational use only; not for clinical decisions, diagnosis or treatment. Results do not replace measurement and interpretation by a qualified clinician.
- The Fick method assumes a steady state and no intracardiac shunt, with the venous sample being true mixed venous (pulmonary artery) blood.
- The assumed oxygen consumption of 125 mL/min per m² is a population average for resting adults and may not fit an individual patient.
- The echo method treats the LVOT as a circular cylinder with a flat velocity profile.
- Normal ranges are for resting adults and are a guide only.
Formula
- Oxygen content: each gram of hemoglobin carries 1.34 mL of O₂ and each mmHg of oxygen tension dissolves 0.0031 mL O₂ per dL of blood; multiplying by 10 gives mL per litre. Hb is in g/dL and SO₂ as a fraction (98% = 0.98).
- VO₂ in mL/min divided by an O₂ difference in mL/L gives litres per minute directly. When VO₂ is not measured, the common resting assumption of 125 mL/min per m² is used (the "assumed Fick" method), which can be well off in sick, febrile or very active people.
- Body surface area uses Mosteller, √(height cm × weight kg ÷ 3600), or Du Bois, 0.007184 × W^0.425 × H^0.725. Imperial inputs are converted with 1 lb = 0.45359237 kg and 1 in = 2.54 cm; 1 kPa = 7.50062 mmHg.
- Echo Doppler: the left ventricular outflow tract is treated as a cylinder, so stroke volume = cross-sectional area (cm²) × VTI (cm) in mL. A small error in the diameter is squared, so it matters most.
- Typical resting adult values: cardiac output 4–8 L/min, cardiac index 2.5–4 L/min/m², stroke volume 50–100 mL. Ranges are compared after rounding to the displayed 2 decimals.
Assumed Fick estimate for a 180 cm, 80 kg adult
- Method: fick
- Units: metric
- Weight: 80
- Height: 180 cm
- Height: feet: 5 ft
- Height: inches: 11 in
- Body surface area formula: mosteller
- Oxygen consumption (VO₂): assumed
- Measured oxygen consumption: 250 mL/min
- Blood oxygen content: calculate
- Hemoglobin unit: gdl
- Hemoglobin: 15
- Oxygen tension unit: mmhg
- Arterial O₂ saturation (SaO₂): 98 %
- Arterial O₂ tension (PaO₂): 95
- Mixed venous O₂ saturation (SvO₂): 75 %
- Mixed venous O₂ tension (PvO₂): 40
- Arterial O₂ content (CaO₂): 200 mL/L
- Mixed venous O₂ content (CvO₂): 150 mL/L
- Heart rate: 70 bpm
- Stroke volume from: direct
- Stroke volume: 70 mL
- End-diastolic volume (EDV): 120 mL
- End-systolic volume (ESV): 50 mL
- LVOT diameter: 20 mm
- LVOT VTI: 20 cm
BSA (Mosteller) = √(180 × 80 ÷ 3600) = 2.00 m², so the assumed VO₂ is 125 × 2 = 250 mL/min. CaO₂ = 13.4 × 15 × 0.98 + 0.031 × 95 = 199.9 mL/L and CvO₂ = 13.4 × 15 × 0.75 + 0.031 × 40 = 152.0 mL/L, a difference of 47.9 mL/L. Cardiac output = 250 ÷ 47.935 = 5.22 L/min, cardiac index = 5.22 ÷ 2.00 = 2.61 L/min/m², and at 70 bpm the stroke volume is 5,215 ÷ 70 = 74.5 mL.